- Home /
- Engine Complete Rebuilt fits Cummins ISB07, 6.7L 65G7D200B, DR6493RX, CPL 279
Freightliner M-Line / ISB07 , Front Sump (3958209), MMRO, Injector 5253221, Rear Gear Hsg 5286979, Flywheel Hsg 4944348
APPLICATIONS
The ISB07 6.7L Cummins is used in many applications including walk-in vans, buses, yard tractors and conventional cabs, Ford F650/750 and commercial delivery vehicles, for model years 2007-2009. Shop utilizes torque plating methods for boring and honing to ensure block straightness, which reduces break-in time and crankcase pressure. In addition, Shop uses OEM or equivalent pistons, rings, bearings, valves and gaskets, making sure that this engine will stand the test of time.
All engines are assembled in the USA.
TO PLACE AN ORDER
Before calling to request price and availability, please gather the following information:
- The original engine serial number
- The original engine CPL number
The CPL and serial numbers are located on the valve cover.
DYNO TEST
All Remanufactured Complete Drop-In engines are 100% dyno tested prior to shipment. Computer controls ensure that each engine dyno test is conducted under standard, repeatable settings. Every engine is run through a warm up cycle; three separate cruise segments simulating light, medium and heavy throttle conditions; maximum torque and horsepower tests; both high and low idle tests; and a black light leak detection test with dyed oil, coolant and fuel.
LONG BLOCK SUPREME INCLUDES:
- Block
- Crankshaft
- Rods
- Oil pump
- Crank gear
- Cam gear
- Piston assemblies
- Camshaft
- Head
- Front gear cover
- Rear Gear Housing
- Gasket set
- Oil cooler
- Oil Pickup Tube
- Oil filter assembly
- Oil pan
- Water pump
- Thermostat
- Valve train (lifters, pushrods & rocker arms)
COMPLETE DROP-IN INCLUDES:
ALL PARTS ON THE LONG BLOCK SUPREME PLUS
- High pressure fuel pump
- Low & high-pressure lines
- Injectors
- Fuel filter *
- Damper & pulley
- Turbocharger
- Intake cover & connection
- Valve cover
- Exhaust manifold
- Sensors & switches
- Fuel manifold
- EGR cooler
- EGR piping
- EGR valve
- Coolant inlet manifold
- Valve cover
- Breather Element
- Breather cover
*SHIPPED LOOSE
Additional Core Charge of $ 4000 Required
Free Freight Lower 48 States Business to Business
Freightliner M-Line / ISB07 , Front Sump (3958209), MMRO, Injector 5253221, Rear Gear Hsg 5286979, Flywheel Hsg 4944348
APPLICATIONS
The ISB07 6.7L Cummins is used in many applications including walk-in vans, buses, yard tractors and conventional cabs, Ford F650/750 and commercial delivery vehicles, for model years 2007-2009. Shop utilizes torque plating methods for boring and honing to ensure block straightness, which reduces break-in time and crankcase pressure. In addition, Shop uses OEM or equivalent pistons, rings, bearings, valves and gaskets, making sure that this engine will stand the test of time.
All engines are assembled in the USA.
TO PLACE AN ORDER
Before calling to request price and availability, please gather the following information:
- The original engine serial number
- The original engine CPL number
The CPL and serial numbers are located on the valve cover.
DYNO TEST
All Remanufactured Complete Drop-In engines are 100% dyno tested prior to shipment. Computer controls ensure that each engine dyno test is conducted under standard, repeatable settings. Every engine is run through a warm up cycle; three separate cruise segments simulating light, medium and heavy throttle conditions; maximum torque and horsepower tests; both high and low idle tests; and a black light leak detection test with dyed oil, coolant and fuel.
LONG BLOCK SUPREME INCLUDES:
- Block
- Crankshaft
- Rods
- Oil pump
- Crank gear
- Cam gear
- Piston assemblies
- Camshaft
- Head
- Front gear cover
- Rear Gear Housing
- Gasket set
- Oil cooler
- Oil Pickup Tube
- Oil filter assembly
- Oil pan
- Water pump
- Thermostat
- Valve train (lifters, pushrods & rocker arms)
COMPLETE DROP-IN INCLUDES:
ALL PARTS ON THE LONG BLOCK SUPREME PLUS
- High pressure fuel pump
- Low & high-pressure lines
- Injectors
- Fuel filter *
- Damper & pulley
- Turbocharger
- Intake cover & connection
- Valve cover
- Exhaust manifold
- Sensors & switches
- Fuel manifold
- EGR cooler
- EGR piping
- EGR valve
- Coolant inlet manifold
- Valve cover
- Breather Element
- Breather cover
*SHIPPED LOOSE
Use spaces to separate tags. Use single quotes (') for phrases.
R F Engine
Store Hours of Operation
Monday – Friday 8:00 – 5:30 EST and Saturday By Appointment Only
1445 E. Lansing Rd. | Morrice, MI 48857
All comments and suggestions about our site are very welcome, appreciated and a valuable source of information.
Limited Warranty
Policies & Procedures
Subject to the limitations in the Limited Warranty, 100% parts and labor* on qualified parts/engine(s) that fail under use and service, due to defects in workmanship or material up to the stated limited warranty period as shown below. Cosumables are not covered.
Limited Warranty - Diesel Products
ON HIGHWAY DIESEL ENGINESComplete Drop-In
1st Year - Complete Engine Unlimited Miles 100% Parts & Labor*
2nd Year - Long Block Only Unlimited Miles 100% Parts & Labor*
Long Block Supreme/Long Block
1 Year Unlimited Miles 100% Parts & Labor*
Short Block
1 Year OR 12,000 Miles (whichever occurs first)
OFF HIGHWAY DIESEL ENGINESAll configurations/applications
*excludes skidsteer & refrigeration applications, see below
1 Year OR 2,000 Hrs. (whichever occurs first) 100% Parts & Labor*
SKIDSTEER DIESEL ENGINESAll Configurations/Applications
6 Months Unlimited Hours, Parts & Labor*
REFRIGERATION DIESEL ENGINESAll Configurations
1 Year Unlimited Hours, Parts & Labor*
Maximum limits for labor reimbursements are as follows: *$850.00 for engines in Agricultural, Industrial, Stationary applications and/or Class A motor homes. Parts will be reimbursed at cost. For complete warranty details call us at 800-828-6943