DT-466E, 175HP(ST), 12NMA,Injector Code "BI", Fuel Inlet = Threaded, Top Inlet Valve Cover, Rear Sump
APPLICATIONS
DT-466 diesel engines are configured for International delivery trucks, garbage trucks, dump trucks and school buses.
ABOUT THE DT-466E
- All Remanufactured engines are assembled in the USA.
- Shop replaces 100% of pistons, rings, bearings, bushings, gaskets and seals.
- All heads get new valves and are vacuum tested to ensure the quality of the valve job. All heads are pressure tested and upgraded to the latest style valve seal.
- Shop grinds 100% of camshafts? lobes.
- All connecting rods are de-magnetized.
- OEM components are used in injection pumps.
- Core plugs are 100% stainless steel to avoid corrosion.
- Blocks, heads and crankshafts are 100% magnaflux tested to avoid cracked components.
- Blocks are resurfaced and have counterbores remachined to ensure proper sleeve protrusion and head gasket sealing.
- Connecting rods have new bushings installed and both large and small end are remachined to OEM specifications.
- Crankshaft is checked for size, reground, if necessary, and polished to OEM specifications.
DYNO TEST
All of Remanufactured Complete Drop-In engines are 100% dyno tested prior to shipment. Computer controls ensure that each engine dyno test is conducted under standard, repeatable settings. Every engine is run through a warm up cycle; three separate segments simulating light, medium and heavy throttle conditions; maximum torque and horsepower tests; both high and low idle tests; and a black light leak detection test with dyed oil, coolant and fuel.
LONG BLOCK SUPREME INCLUDES:
- Block
- Crankshaft
- Rods
- Oil pan
- Oil cooler
- Oil pump
- Valve cover
- Pickup tube
- Water pump (no pulley)
- Valve train
- Piston/sleeve assemblies
- Camshaft
- Timing gears
- Head
- Front cover & seal
- Oil filter
- Gasket set
- Thermostat
- Thermostat housing
- Water filter
- Damper & pulley assembly
- Front engine mount
COMPLETE DROP-IN NCLUDES:
ALL PARTS ON THE LONG BLOCK SUPREME PLUS
- Air crossover tube*
- Turbocharger
- Intake manifold
- Exhaust manifolds
- Dipstick guide (lower portion)
- Camshaft position sensor
- Complete fuel system (NEW HEUI injectors, high & low pressure lines, high pressure pump & fuel filter assembly)
*WHERE REQUIRED
WITH NEW OEM HEUI INJECTORS
As a quality enhancement, Shop will install new HEUI injectors on all DT-466E Complete Drop-In engines. These new injectors from the OE manufacturer have tungsten coated plungers (the pumping element in the injector), which is an improvement over some earlier OE injectors.
Additional Core Charge of $ 3000 Required
Free Freight Lower 48 States Business to Business
| SKU | 54G0D175AR |
|---|---|
| OEM Numbers | 54G0D175AR, 2596696c91 |
| Video | N/A |
