DT-466E, 245-285 HP 12NPP, 12NPS, 12NPT, 12NPU, 12NPV turbo=LMRO, Front Sump
APPLICATIONS
DT-466EGR diesel engines are configured for International delivery trucks, garbage trucks, dump trucks and school buses.
- Model Years 2004-2007.5
ABOUT THE DT-466EGR
- All Remanufactured engines are assembled in the USA.
- Shop replaces 100% of pistons, rings, bearings, bushings, gaskets and seals.
- All heads get new valves and are vacuum tested to ensure the quality of the valve job.
- Shop grinds and polishes 100% of camshafts? lobes.
- All connecting rods are de-magnetized.
- All high-pressure oil pumps are remanufactured and tested to ensure performance.
- Core plugs are 100% stainless steel to avoid corrosion.
- Blocks, heads and crankshafts are magnaflux tested to avoid any possible cracks.
- Cylinder heads are pressure tested before assembly to eliminate possibility of coolant leak.
- Blocks are resurfaced and have counterbores remachined to ensure proper sleeve protrusion and head gasket sealing.
- Connecting rods have new bushings installed and both large and small end are remachined to OEM specifications.
- Crankshaft is checked for size, reground, if necessary, and polished to OEM specifications.
DYNO TEST
All Remanufactured Complete Drop-In engines are 100% dyno tested prior to shipment. Computer controls ensure that each engine dyno test is conducted under standard, repeatable settings. Every engine is run through a warm up cycle; three separate segments simulating light, medium and heavy throttle conditions; maximum torque and horsepower tests; both high and low idle tests; and a black light leak detection test with dyed oil, coolant and fuel.
LONG BLOCK INCLUDES:
- Block
- Crankshaft
- Rods
- Oil pump
- Valve cover
- Valve train
- Piston/sleeve assemblies
- Camshaft
- Timing gears
- Head
- Front cover & seal
- Crankshaft hub & damper
- High pressure oil pump
* GASKET SET TO COMPLETE LONG BLOCK AVAILABLE FOR PURCHASE
RUNNING ENGINE INCLUDES:
ALL PARTS ON THE LONG BLOCK PLUS
- Oil pan
- Oil cooler
- Pickup tube
- Water pump (no pulley)
- Oil filter
- Thermostat
- Thermostat housing
- Flywheel housing
- Front engine mount
- Dipstick guide (lower portion)
- Turbocharger
- Intake manifold & air inlet
- Exhaust manifolds
- All sensors
- Complete fuel system (injectors, high & low-pressure lines& fuel filter assembly)
* GASKET SET TO COMPLETE RUNNING ENGINE AVAILABLE FOR PURCHASE
COMPLETE DROP-IN ENGINE INCLUDES:
ALL PARTS ON THE RUNNING ENGINE PLUS
- EGR cooler
- EGR valve
- EGR pipes
Additional Core Charge of $ 3600 Required
Free Freight Lower 48 States Business to Business