Details
Engine Rebuild Kit Includes:
- Piston (One Piece (see below)), Rings, Wrist Pin, Pin Locks
- Liner with O-rings
- Full Gasket Set
- Front Crankshaft Seal
- Rear Crankshaft Seal
- Pick Up Tube O-Ring
- Rod Bearings
- Main Bearing Set
- Bypass Valve, Plunger
- Engines Kit K4352290 with Piston&Rings 2881879 uses the Non-APR 150mm Liner. You can update to the APR liner by purchasing the K4376175 Inframe Kit with Piston&Rings 4376243
- Engines Kit K4352289 with Piston&Rings 2881878 uses the Non-APR 150mm Liner. You can update to the APR liner by purchasing the K4376174 Inframe Kit with Piston&Rings 4376244
- Piston Liner Assembly Reference:
- 4955968 & 4089898 - This kit is for engines equipped with EGR. This popular EGR piston is used in, but not limited to, the following engine CPL numbers: 1437, 2732, 3229, 8287, 8288, 8520, 8523
- Engines produced before 2003 were built using 2 piece articulating pistons and traditional-type, solid beam connecting rods.
- Engines produced during or after 2003 were built using upgraded, single piece open or closed skirt pistons and "Rifle Drilled" connecting rods. (Rod #4059449)
- Rifle Drilled Connecting rods have an oil hole drilled all the way along the inside of the shaft. This oil hole allows oil to flow to the piston pin connection.
- Piston pin bore inside diameter
- Rod Bushing inside diameter
- Piston Pin
- Engine Torque Specs:
- Main Bearing Torque: Before engine serial number 79012120, 110 ft/lbs + 110 Degrees / After engine serial number 79012120, 300 ft/lbs, loosen, 300 ft/lbs + 90 Degrees
- Intake Valve Lash .014" Cold
- Exhaust Valve Lash .027" Cold
- Cylinder Head Torque: 148 ft/lbs, 300 ft/lbs, +90 Degrees
Fitment Guide
Warranty Information
Reliance Power Parts Warranty Policy
The Reliance Power Parts (RPP) warranty policy covers parts and labor necessary to repair a warrantable failure to the functional condition of the application that existed immediately prior to the failure, as detailed below. This warranty applies to direct customers of RPP only and is non-transferable.
Coverage Periods
- New Internal Engine Parts (Ag/Industrial): 1 year from invoice date, unlimited miles/hours
- Engine Overhaul Kits (Heavy-Duty On-Highway): 2 years from invoice date, unlimited miles/hours
- New Engine Accessories: 1 year from invoice date, parts replacement only
- Remanufactured Engine Accessories: 6 months from invoice date, parts replacement only
- Remanufactured Engine & Drivetrain Parts: 6 months from invoice date, parts replacement only
- Drivetrain Parts: 1 year from invoice date, parts replacement only
- Complete Engines & New Long Blocks (Reliance Manufactured): 6 months from invoice date, parts replacement only
- Remanufactured Long/Short Blocks & New Short Blocks (Reliance Manufactured): 90 days from invoice date, parts replacement only
Engine accessories include turbochargers, fuel injectors, hydraulic pumps, engine oil pumps, oil coolers, water pumps, and electrical components.
Manufacturer's Warranty Items
To serve a wider application base, RPP offers lower volume, rare application, and remanufactured parts from a variety of manufacturers. These parts will be noted on your invoice as subject to a "Manufacturer's Warranty" policy and are not covered under this policy. Engines, long blocks, medium blocks, and short blocks produced by any company other than Reliance are solely covered by the manufacturer's warranty. Contact your Reliance representative for details.
Parts & Labor Coverage
- Parts: Covered at current customer pricing using new or remanufactured RPP approved parts
- OEM/Outside Parts: When RPP parts are available, OEM parts will be credited at RPP pricing. Parts not available from RPP will be covered at billed rate with invoice required
- Labor: Offered at RPP's discretion, not to exceed published flat-rate times and maximum regional wholesale hourly labor rate
- Holiday/Overtime Rates: Not covered
What's Not Covered
This warranty does not cover failures resulting from:
- Owner or operator abuse or neglect
- Operation without adequate coolant, fuel, or lubricants
- Over-fueling or over-speeding
- Lack of maintenance of lubricating, coolant, or air intake systems
- Improper storage, starting, warm-up, run-in, or shut-down practices
Coverage does not include:
- Troubleshooting or diagnostic time
- Towing, transport, or down-time
- Rental fees or incidentals
- Delivery charges, travel, meals, or lodging
- Business losses, docking, or harbor charges
Responsibilities
- Installer: Ensure parts are correct for the application and install according to OEM procedures, specifications, and accepted industry standards
- Owner: Operate and maintain equipment as specified in OEM operation and maintenance manuals
How to File a Claim
- RPP must be notified prior to the end of the warranty period
- All warranty repairs must be authorized by RPP technical staff
- Request a Warranty Claim Form for the return of parts
- Return all claimed parts to the indicated location within 30 days of receiving a Return Merchandise Authorization
- Include failed parts, completed Warranty Claim Form, and copies of related work orders or invoices
- Ship parts freight pre-paid in a condition that makes examination possible
- Parts received without a Warranty Claim Form will be returned freight collect
Important Notes
- Professional Installation Required: We strongly recommend installation by a qualified technician to ensure proper break-in and operation
- Keep Your Records: Retain your invoice and service records for warranty claims
- Questions?: If you're unsure about coverage or need assistance, please contact us
The warranties set forth herein are the sole warranties made by RPP regarding its parts. RPP makes no other warranties, expressed or implied, of merchantability or fitness for a particular purpose.
Recently Viewed
Cummins L10 Inframe-Overhaul Engine Rebuild Kit - Inframe Kit (Cylinder Kit 3800800, 3803970)
International D466 Inframe-Overhaul Engine Rebuild Kit - Inframe Kit
Caterpillar 3116 Inframe-Overhaul Engine Rebuild Kit (IPD Two Piece Piston) - Out of Frame Kit, Truck PK6I1210B .50mm bore option NON Grooved Block
Caterpillar 3406, 3406B, 3406C Inframe-Overhaul Engine Rebuild Kit (Interstate McBee) - Inframe Kit w/ 7E0292 Piston
Fuel Line Connector Kit RP588 for John Deere 164, 179, 219, 239, 276, 359, 3029, 4039, 4045, 6068, 414, 466 Diesel
John Deere 4045T Non-PowerTech (Piston RE48469) Inframe Engine Rebuild Kit
Waukesha 155, 265 Exhaust Valve Guide
International Piston Ring Set C113, C123 Gas (3.25" Overbore)
Crankshaft Remachined Waukesha 129, 144, 180DL, 180SB, 180GA Late 30/20 Rods & Mains
Case 504BDT, A504BDT (5.415" Sleeve Flange, 1.625" Piston Pin) Out-of-Frame Engine Rebuild Kit
Connecting Rod
Engine Complete Non-Running Core Fits John Deere 6303 ESN: 141227T MDN: M61HA
All specifications and numbers are provided for reference only and should be independently verified before use. While we guarantee our parts match their descriptions and accept returns for any discrepancies, we cannot be held liable for installation costs, modifications, or consequential damages. Questions about compatibility? Contact our parts experts at 800-828-6943, sales@dieselcranks.com, or via live chat, Mon-Fri 8am-5pm EST.