layer-group Multiple options, conditions, or variants are available for this item.
Standard $6141
.001" $18782
.002" $15148
.010" $6141
.020" $6141
.030" $6141
.040" $8467

Piston Ring Set (STD) for Ford 261291

SKU: F261291

tag Brand: Reliance Reliance brand replacement parts
sparkles Condition: New Aftermarket
shuffle Cross-References: 106267, 261291, 4001M, 60876, A-MB634, F261291, FDS2800, FO002-MS466P-RE, FP-4001M, FP4001M, HCRF261291, HM466S, MB3342AM STD, MB3342AMSTD, MBK134172-STD, MBK134172STD, MS466P, P261291, RMB4453000, S.60876, TMS134STD
tractor Fits Equipment
Allis Chalmers 706B Allis Chalmers 540
engine Fits Engines
Ford / New Holland 192 Ford / New Holland 172 | 1/'55 and after, 1.25" Piston Pin Diameter, Early press fit sleeves can be bored up to .040" oversize Ford / New Holland 144 | 1/'59 thru 12/'64, 1.124" Piston Pin Diameter
$6141
award-simple Best Price Promise!
box-check In Stock (99+)
Qty:
The RF Engine Advantage
Family Operated Since 1975
Parts that meet or exceed OEM specifications. Guaranteed performance you can trust. Reliability built into every component.
A century of collective diesel knowledge and 10+ acres of engines and engine parts — we are more than just an online reseller or call center. We know heavy-duty diesel.
Same location and same phone number for the last 50 years. Same commitment to getting you the right parts at the right price.
RF Engine offers an expansive offering of new aftermarket, remanufactured, and used engines and engine parts all under one roof.

memo-circle-info Details


medal Our aftermarket replacement parts are built to OEM-equivalent standards. They have been produced to meet or exceed original equipment specifications for material quality, dimensional tolerance, and field durability — the same rigors the factory part is designed to handle. The result is a component that installs like factory, performs like factory, and delivers long service life without the dealer price tag.

tractor Fitment Guide

forklift Forklifts (1)
Allis Chalmers 706B
bulldozer Wheel Loaders (1)
Allis Chalmers 540
engine Engines (6)
Ford / New Holland 192 4-cyl • Diesel
Ford / New Holland 172 | 1/'55 and after, 1.25" Piston Pin Diameter, Early press fit sleeves can be bored up to .040" oversize 4-cyl • Diesel
Ford / New Holland 144 | 1/'59 thru 12/'64, 1.124" Piston Pin Diameter 4-cyl • Diesel
Ford / New Holland 192 4-cyl • Gas/LPG
Ford / New Holland 172 | 1/'55 and after, .912" Piston Pin Diameter, Early press fit sleeves can be bored up to .040" oversize 4-cyl • Gas/LPG
Ford / New Holland 134 | 1/'53 and after, Press fit sleeves in early engines can be bored up to .040" oversize 4-cyl • Gas/LPG
exclamation While every effort has been made to ensure the accuracy of the fitment information listed above, it is ultimately the responsibility of the installing mechanic to perform a side-by-side comparison of the replacement part with the original to verify proper fit before installation. RF Engine is not liable for labor or consequential damages resulting from incorrect application.

shield-check Warranty Information

Reliance Power Parts Warranty Policy

The Reliance Power Parts (RPP) warranty policy covers parts and labor necessary to repair a warrantable failure to the functional condition of the application that existed immediately prior to the failure, as detailed below. This warranty applies to direct customers of RPP only and is non-transferable.


Coverage Periods

  • New Internal Engine Parts (Ag/Industrial): 1 year from invoice date, unlimited miles/hours
  • Engine Overhaul Kits (Heavy-Duty On-Highway): 2 years from invoice date, unlimited miles/hours
  • New Engine Accessories: 1 year from invoice date, parts replacement only
  • Remanufactured Engine Accessories: 6 months from invoice date, parts replacement only
  • Remanufactured Engine & Drivetrain Parts: 6 months from invoice date, parts replacement only
  • Drivetrain Parts: 1 year from invoice date, parts replacement only
  • Complete Engines, New Long Blocks & New Short Blocks (Reliance Manufactured): 6 months from invoice date, parts replacement only
  • Remanufactured Long Blocks & Short Blocks (Reliance Manufactured): 90 days from invoice date, parts replacement only

Engine accessories include turbochargers, fuel injectors, hydraulic pumps, engine oil pumps, oil coolers, water pumps, and electrical components.


Manufacturer's Warranty Items

To serve a wider application base, RPP offers lower volume, rare application, and remanufactured parts from a variety of manufacturers. These parts will be noted on your invoice as subject to a "Manufacturer's Warranty" policy and are not covered under this policy. Engines, long blocks, medium blocks, and short blocks produced by any company other than Reliance are solely covered by the manufacturer's warranty. Contact your Reliance representative for details.


Parts & Labor Coverage

  • Parts: Covered at current customer pricing using new or remanufactured RPP approved parts
  • OEM/Outside Parts: When RPP parts are available, OEM parts will be credited at RPP pricing. Parts not available from RPP will be covered at billed rate with invoice required
  • Labor: Offered at RPP's discretion, not to exceed published flat-rate times and maximum regional wholesale hourly labor rate
  • Holiday/Overtime Rates: Not covered

What's Not Covered

This warranty does not cover failures resulting from:

  • Owner or operator abuse or neglect
  • Operation without adequate coolant, fuel, or lubricants
  • Over-fueling or over-speeding
  • Lack of maintenance of lubricating, coolant, or air intake systems
  • Improper storage, starting, warm-up, run-in, or shut-down practices

Coverage does not include:

  • Troubleshooting or diagnostic time
  • Towing, transport, or down-time
  • Rental fees or incidentals
  • Delivery charges, travel, meals, or lodging
  • Business losses, docking, or harbor charges

Responsibilities

  • Installer: Ensure parts are correct for the application and install according to OEM procedures, specifications, and accepted industry standards
  • Owner: Operate and maintain equipment as specified in OEM operation and maintenance manuals

How to File a Claim

  • RPP must be notified prior to the end of the warranty period
  • All warranty repairs must be authorized by RPP technical staff
  • Request a Warranty Claim Form for the return of parts
  • Return all claimed parts to the indicated location within 30 days of receiving a Return Merchandise Authorization
  • Include failed parts, completed Warranty Claim Form, and copies of related work orders or invoices
  • Ship parts freight pre-paid in a condition that makes examination possible
  • Parts received without a Warranty Claim Form will be returned freight collect

Important Notes

  • Professional Installation Required: We strongly recommend installation by a qualified technician to ensure proper break-in and operation
  • Keep Your Records: Retain your invoice and service records for warranty claims
  • Questions?: If you're unsure about coverage or need assistance, please contact us

The warranties set forth herein are the sole warranties made by RPP regarding its parts. RPP makes no other warranties, expressed or implied, of merchantability or fitness for a particular purpose.

Main Bearing Set (.001") for Allis Chalmers 261292

SKU: F261292

tag Brand: Reliance Reliance brand replacement parts
sparkles Condition: New Aftermarket
shuffle Cross-References: 261292, 4001M1, F261292, MS466P1, P261292
tractor Fits Equipment
Allis Chalmers 706B Allis Chalmers 540
engine Fits Engines
Ford / New Holland 192 Ford / New Holland 172 | 1/'55 and after, 1.25" Piston Pin Diameter, Early press fit sleeves can be bored up to .040" oversize Ford / New Holland 144 | 1/'59 thru 12/'64, 1.124" Piston Pin Diameter
$18782
award-simple Best Price Promise!
box-open Out of Stock

Call 800-828-6943 to check availability.

The RF Engine Advantage
Family Operated Since 1975
Parts that meet or exceed OEM specifications. Guaranteed performance you can trust. Reliability built into every component.
A century of collective diesel knowledge and 10+ acres of engines and engine parts — we are more than just an online reseller or call center. We know heavy-duty diesel.
Same location and same phone number for the last 50 years. Same commitment to getting you the right parts at the right price.
RF Engine offers an expansive offering of new aftermarket, remanufactured, and used engines and engine parts all under one roof.

memo-circle-info Details

.001"oversize


medal Our aftermarket replacement parts are built to OEM-equivalent standards. They have been produced to meet or exceed original equipment specifications for material quality, dimensional tolerance, and field durability — the same rigors the factory part is designed to handle. The result is a component that installs like factory, performs like factory, and delivers long service life without the dealer price tag.

tractor Fitment Guide

forklift Forklifts (1)
Allis Chalmers 706B
bulldozer Wheel Loaders (1)
Allis Chalmers 540
engine Engines (6)
Ford / New Holland 192 4-cyl • Diesel
Ford / New Holland 172 | 1/'55 and after, 1.25" Piston Pin Diameter, Early press fit sleeves can be bored up to .040" oversize 4-cyl • Diesel
Ford / New Holland 144 | 1/'59 thru 12/'64, 1.124" Piston Pin Diameter 4-cyl • Diesel
Ford / New Holland 192 4-cyl • Gas/LPG
Ford / New Holland 172 | 1/'55 and after, .912" Piston Pin Diameter, Early press fit sleeves can be bored up to .040" oversize 4-cyl • Gas/LPG
Ford / New Holland 134 | 1/'53 and after, Press fit sleeves in early engines can be bored up to .040" oversize 4-cyl • Gas/LPG
exclamation While every effort has been made to ensure the accuracy of the fitment information listed above, it is ultimately the responsibility of the installing mechanic to perform a side-by-side comparison of the replacement part with the original to verify proper fit before installation. RF Engine is not liable for labor or consequential damages resulting from incorrect application.

shield-check Warranty Information

Reliance Power Parts Warranty Policy

The Reliance Power Parts (RPP) warranty policy covers parts and labor necessary to repair a warrantable failure to the functional condition of the application that existed immediately prior to the failure, as detailed below. This warranty applies to direct customers of RPP only and is non-transferable.


Coverage Periods

  • New Internal Engine Parts (Ag/Industrial): 1 year from invoice date, unlimited miles/hours
  • Engine Overhaul Kits (Heavy-Duty On-Highway): 2 years from invoice date, unlimited miles/hours
  • New Engine Accessories: 1 year from invoice date, parts replacement only
  • Remanufactured Engine Accessories: 6 months from invoice date, parts replacement only
  • Remanufactured Engine & Drivetrain Parts: 6 months from invoice date, parts replacement only
  • Drivetrain Parts: 1 year from invoice date, parts replacement only
  • Complete Engines, New Long Blocks & New Short Blocks (Reliance Manufactured): 6 months from invoice date, parts replacement only
  • Remanufactured Long Blocks & Short Blocks (Reliance Manufactured): 90 days from invoice date, parts replacement only

Engine accessories include turbochargers, fuel injectors, hydraulic pumps, engine oil pumps, oil coolers, water pumps, and electrical components.


Manufacturer's Warranty Items

To serve a wider application base, RPP offers lower volume, rare application, and remanufactured parts from a variety of manufacturers. These parts will be noted on your invoice as subject to a "Manufacturer's Warranty" policy and are not covered under this policy. Engines, long blocks, medium blocks, and short blocks produced by any company other than Reliance are solely covered by the manufacturer's warranty. Contact your Reliance representative for details.


Parts & Labor Coverage

  • Parts: Covered at current customer pricing using new or remanufactured RPP approved parts
  • OEM/Outside Parts: When RPP parts are available, OEM parts will be credited at RPP pricing. Parts not available from RPP will be covered at billed rate with invoice required
  • Labor: Offered at RPP's discretion, not to exceed published flat-rate times and maximum regional wholesale hourly labor rate
  • Holiday/Overtime Rates: Not covered

What's Not Covered

This warranty does not cover failures resulting from:

  • Owner or operator abuse or neglect
  • Operation without adequate coolant, fuel, or lubricants
  • Over-fueling or over-speeding
  • Lack of maintenance of lubricating, coolant, or air intake systems
  • Improper storage, starting, warm-up, run-in, or shut-down practices

Coverage does not include:

  • Troubleshooting or diagnostic time
  • Towing, transport, or down-time
  • Rental fees or incidentals
  • Delivery charges, travel, meals, or lodging
  • Business losses, docking, or harbor charges

Responsibilities

  • Installer: Ensure parts are correct for the application and install according to OEM procedures, specifications, and accepted industry standards
  • Owner: Operate and maintain equipment as specified in OEM operation and maintenance manuals

How to File a Claim

  • RPP must be notified prior to the end of the warranty period
  • All warranty repairs must be authorized by RPP technical staff
  • Request a Warranty Claim Form for the return of parts
  • Return all claimed parts to the indicated location within 30 days of receiving a Return Merchandise Authorization
  • Include failed parts, completed Warranty Claim Form, and copies of related work orders or invoices
  • Ship parts freight pre-paid in a condition that makes examination possible
  • Parts received without a Warranty Claim Form will be returned freight collect

Important Notes

  • Professional Installation Required: We strongly recommend installation by a qualified technician to ensure proper break-in and operation
  • Keep Your Records: Retain your invoice and service records for warranty claims
  • Questions?: If you're unsure about coverage or need assistance, please contact us

The warranties set forth herein are the sole warranties made by RPP regarding its parts. RPP makes no other warranties, expressed or implied, of merchantability or fitness for a particular purpose.

Main Bearing Set (.002") for Allis Chalmers 261293

SKU: F261293

tag Brand: Reliance Reliance brand replacement parts
sparkles Condition: New Aftermarket
shuffle Cross-References: 261293, 261293A, 4001M2, F261293, HCRF261293, HM466S-002, HM466S002, HM466S2, MB3342AM-002, MB3342AM002, MB63402, MS466P-02, MS466P2, P261293
tractor Fits Equipment
Allis Chalmers 706B Allis Chalmers 540
engine Fits Engines
Ford / New Holland 192 Ford / New Holland 172 | 1/'55 and after, 1.25" Piston Pin Diameter, Early press fit sleeves can be bored up to .040" oversize Ford / New Holland 144 | 1/'59 thru 12/'64, 1.124" Piston Pin Diameter
$15148
award-simple Best Price Promise!
box-open Out of Stock

Call 800-828-6943 to check availability.

The RF Engine Advantage
Family Operated Since 1975
Parts that meet or exceed OEM specifications. Guaranteed performance you can trust. Reliability built into every component.
A century of collective diesel knowledge and 10+ acres of engines and engine parts — we are more than just an online reseller or call center. We know heavy-duty diesel.
Same location and same phone number for the last 50 years. Same commitment to getting you the right parts at the right price.
RF Engine offers an expansive offering of new aftermarket, remanufactured, and used engines and engine parts all under one roof.

memo-circle-info Details

.002"oversize


medal Our aftermarket replacement parts are built to OEM-equivalent standards. They have been produced to meet or exceed original equipment specifications for material quality, dimensional tolerance, and field durability — the same rigors the factory part is designed to handle. The result is a component that installs like factory, performs like factory, and delivers long service life without the dealer price tag.

tractor Fitment Guide

forklift Forklifts (1)
Allis Chalmers 706B
bulldozer Wheel Loaders (1)
Allis Chalmers 540
engine Engines (6)
Ford / New Holland 192 4-cyl • Diesel
Ford / New Holland 172 | 1/'55 and after, 1.25" Piston Pin Diameter, Early press fit sleeves can be bored up to .040" oversize 4-cyl • Diesel
Ford / New Holland 144 | 1/'59 thru 12/'64, 1.124" Piston Pin Diameter 4-cyl • Diesel
Ford / New Holland 192 4-cyl • Gas/LPG
Ford / New Holland 172 | 1/'55 and after, .912" Piston Pin Diameter, Early press fit sleeves can be bored up to .040" oversize 4-cyl • Gas/LPG
Ford / New Holland 134 | 1/'53 and after, Press fit sleeves in early engines can be bored up to .040" oversize 4-cyl • Gas/LPG
exclamation While every effort has been made to ensure the accuracy of the fitment information listed above, it is ultimately the responsibility of the installing mechanic to perform a side-by-side comparison of the replacement part with the original to verify proper fit before installation. RF Engine is not liable for labor or consequential damages resulting from incorrect application.

shield-check Warranty Information

Reliance Power Parts Warranty Policy

The Reliance Power Parts (RPP) warranty policy covers parts and labor necessary to repair a warrantable failure to the functional condition of the application that existed immediately prior to the failure, as detailed below. This warranty applies to direct customers of RPP only and is non-transferable.


Coverage Periods

  • New Internal Engine Parts (Ag/Industrial): 1 year from invoice date, unlimited miles/hours
  • Engine Overhaul Kits (Heavy-Duty On-Highway): 2 years from invoice date, unlimited miles/hours
  • New Engine Accessories: 1 year from invoice date, parts replacement only
  • Remanufactured Engine Accessories: 6 months from invoice date, parts replacement only
  • Remanufactured Engine & Drivetrain Parts: 6 months from invoice date, parts replacement only
  • Drivetrain Parts: 1 year from invoice date, parts replacement only
  • Complete Engines, New Long Blocks & New Short Blocks (Reliance Manufactured): 6 months from invoice date, parts replacement only
  • Remanufactured Long Blocks & Short Blocks (Reliance Manufactured): 90 days from invoice date, parts replacement only

Engine accessories include turbochargers, fuel injectors, hydraulic pumps, engine oil pumps, oil coolers, water pumps, and electrical components.


Manufacturer's Warranty Items

To serve a wider application base, RPP offers lower volume, rare application, and remanufactured parts from a variety of manufacturers. These parts will be noted on your invoice as subject to a "Manufacturer's Warranty" policy and are not covered under this policy. Engines, long blocks, medium blocks, and short blocks produced by any company other than Reliance are solely covered by the manufacturer's warranty. Contact your Reliance representative for details.


Parts & Labor Coverage

  • Parts: Covered at current customer pricing using new or remanufactured RPP approved parts
  • OEM/Outside Parts: When RPP parts are available, OEM parts will be credited at RPP pricing. Parts not available from RPP will be covered at billed rate with invoice required
  • Labor: Offered at RPP's discretion, not to exceed published flat-rate times and maximum regional wholesale hourly labor rate
  • Holiday/Overtime Rates: Not covered

What's Not Covered

This warranty does not cover failures resulting from:

  • Owner or operator abuse or neglect
  • Operation without adequate coolant, fuel, or lubricants
  • Over-fueling or over-speeding
  • Lack of maintenance of lubricating, coolant, or air intake systems
  • Improper storage, starting, warm-up, run-in, or shut-down practices

Coverage does not include:

  • Troubleshooting or diagnostic time
  • Towing, transport, or down-time
  • Rental fees or incidentals
  • Delivery charges, travel, meals, or lodging
  • Business losses, docking, or harbor charges

Responsibilities

  • Installer: Ensure parts are correct for the application and install according to OEM procedures, specifications, and accepted industry standards
  • Owner: Operate and maintain equipment as specified in OEM operation and maintenance manuals

How to File a Claim

  • RPP must be notified prior to the end of the warranty period
  • All warranty repairs must be authorized by RPP technical staff
  • Request a Warranty Claim Form for the return of parts
  • Return all claimed parts to the indicated location within 30 days of receiving a Return Merchandise Authorization
  • Include failed parts, completed Warranty Claim Form, and copies of related work orders or invoices
  • Ship parts freight pre-paid in a condition that makes examination possible
  • Parts received without a Warranty Claim Form will be returned freight collect

Important Notes

  • Professional Installation Required: We strongly recommend installation by a qualified technician to ensure proper break-in and operation
  • Keep Your Records: Retain your invoice and service records for warranty claims
  • Questions?: If you're unsure about coverage or need assistance, please contact us

The warranties set forth herein are the sole warranties made by RPP regarding its parts. RPP makes no other warranties, expressed or implied, of merchantability or fitness for a particular purpose.

Main Bearing Set (.010") for Ford 261294

SKU: F261294

tag Brand: Reliance Reliance brand replacement parts
sparkles Condition: New Aftermarket
shuffle Cross-References: 106269, 261294, 4001M10, 60877, A-MB634-10, F261294, FDS2802, FO002-MS466P10-CV, FP-4001M10, FP4001M10, HCRF261294, HM466S-10, HM466S10, MB3342AM-10, MB3342AM10, MB63410, MBK134172-010, MBK134172010, MS466P-10, MS466P10, P261294, RMB4453010, S.60877, TMS134010
tractor Fits Equipment
Allis Chalmers 706B Allis Chalmers 540
engine Fits Engines
Ford / New Holland 192 Ford / New Holland 172 | 1/'55 and after, 1.25" Piston Pin Diameter, Early press fit sleeves can be bored up to .040" oversize Ford / New Holland 144 | 1/'59 thru 12/'64, 1.124" Piston Pin Diameter
$6141
award-simple Best Price Promise!
box-check In Stock (99+)
Qty:
The RF Engine Advantage
Family Operated Since 1975
Parts that meet or exceed OEM specifications. Guaranteed performance you can trust. Reliability built into every component.
A century of collective diesel knowledge and 10+ acres of engines and engine parts — we are more than just an online reseller or call center. We know heavy-duty diesel.
Same location and same phone number for the last 50 years. Same commitment to getting you the right parts at the right price.
RF Engine offers an expansive offering of new aftermarket, remanufactured, and used engines and engine parts all under one roof.

memo-circle-info Details


medal Our aftermarket replacement parts are built to OEM-equivalent standards. They have been produced to meet or exceed original equipment specifications for material quality, dimensional tolerance, and field durability — the same rigors the factory part is designed to handle. The result is a component that installs like factory, performs like factory, and delivers long service life without the dealer price tag.

tractor Fitment Guide

forklift Forklifts (1)
Allis Chalmers 706B
bulldozer Wheel Loaders (1)
Allis Chalmers 540
engine Engines (6)
Ford / New Holland 192 4-cyl • Diesel
Ford / New Holland 172 | 1/'55 and after, 1.25" Piston Pin Diameter, Early press fit sleeves can be bored up to .040" oversize 4-cyl • Diesel
Ford / New Holland 144 | 1/'59 thru 12/'64, 1.124" Piston Pin Diameter 4-cyl • Diesel
Ford / New Holland 192 4-cyl • Gas/LPG
Ford / New Holland 172 | 1/'55 and after, .912" Piston Pin Diameter, Early press fit sleeves can be bored up to .040" oversize 4-cyl • Gas/LPG
Ford / New Holland 134 | 1/'53 and after, Press fit sleeves in early engines can be bored up to .040" oversize 4-cyl • Gas/LPG
exclamation While every effort has been made to ensure the accuracy of the fitment information listed above, it is ultimately the responsibility of the installing mechanic to perform a side-by-side comparison of the replacement part with the original to verify proper fit before installation. RF Engine is not liable for labor or consequential damages resulting from incorrect application.

shield-check Warranty Information

Reliance Power Parts Warranty Policy

The Reliance Power Parts (RPP) warranty policy covers parts and labor necessary to repair a warrantable failure to the functional condition of the application that existed immediately prior to the failure, as detailed below. This warranty applies to direct customers of RPP only and is non-transferable.


Coverage Periods

  • New Internal Engine Parts (Ag/Industrial): 1 year from invoice date, unlimited miles/hours
  • Engine Overhaul Kits (Heavy-Duty On-Highway): 2 years from invoice date, unlimited miles/hours
  • New Engine Accessories: 1 year from invoice date, parts replacement only
  • Remanufactured Engine Accessories: 6 months from invoice date, parts replacement only
  • Remanufactured Engine & Drivetrain Parts: 6 months from invoice date, parts replacement only
  • Drivetrain Parts: 1 year from invoice date, parts replacement only
  • Complete Engines, New Long Blocks & New Short Blocks (Reliance Manufactured): 6 months from invoice date, parts replacement only
  • Remanufactured Long Blocks & Short Blocks (Reliance Manufactured): 90 days from invoice date, parts replacement only

Engine accessories include turbochargers, fuel injectors, hydraulic pumps, engine oil pumps, oil coolers, water pumps, and electrical components.


Manufacturer's Warranty Items

To serve a wider application base, RPP offers lower volume, rare application, and remanufactured parts from a variety of manufacturers. These parts will be noted on your invoice as subject to a "Manufacturer's Warranty" policy and are not covered under this policy. Engines, long blocks, medium blocks, and short blocks produced by any company other than Reliance are solely covered by the manufacturer's warranty. Contact your Reliance representative for details.


Parts & Labor Coverage

  • Parts: Covered at current customer pricing using new or remanufactured RPP approved parts
  • OEM/Outside Parts: When RPP parts are available, OEM parts will be credited at RPP pricing. Parts not available from RPP will be covered at billed rate with invoice required
  • Labor: Offered at RPP's discretion, not to exceed published flat-rate times and maximum regional wholesale hourly labor rate
  • Holiday/Overtime Rates: Not covered

What's Not Covered

This warranty does not cover failures resulting from:

  • Owner or operator abuse or neglect
  • Operation without adequate coolant, fuel, or lubricants
  • Over-fueling or over-speeding
  • Lack of maintenance of lubricating, coolant, or air intake systems
  • Improper storage, starting, warm-up, run-in, or shut-down practices

Coverage does not include:

  • Troubleshooting or diagnostic time
  • Towing, transport, or down-time
  • Rental fees or incidentals
  • Delivery charges, travel, meals, or lodging
  • Business losses, docking, or harbor charges

Responsibilities

  • Installer: Ensure parts are correct for the application and install according to OEM procedures, specifications, and accepted industry standards
  • Owner: Operate and maintain equipment as specified in OEM operation and maintenance manuals

How to File a Claim

  • RPP must be notified prior to the end of the warranty period
  • All warranty repairs must be authorized by RPP technical staff
  • Request a Warranty Claim Form for the return of parts
  • Return all claimed parts to the indicated location within 30 days of receiving a Return Merchandise Authorization
  • Include failed parts, completed Warranty Claim Form, and copies of related work orders or invoices
  • Ship parts freight pre-paid in a condition that makes examination possible
  • Parts received without a Warranty Claim Form will be returned freight collect

Important Notes

  • Professional Installation Required: We strongly recommend installation by a qualified technician to ensure proper break-in and operation
  • Keep Your Records: Retain your invoice and service records for warranty claims
  • Questions?: If you're unsure about coverage or need assistance, please contact us

The warranties set forth herein are the sole warranties made by RPP regarding its parts. RPP makes no other warranties, expressed or implied, of merchantability or fitness for a particular purpose.

Main Bearing (.020") for Ford 261295

SKU: F261295

tag Brand: Mahle-clevite Mahle-Clevite brand replacement parts
sparkles Condition: New Aftermarket
shuffle Cross-References: 106270, 261295, 4001M20, 60878, A-MB634-20, F261295, FDS2804, FO002-MS466P20-CV, FP-4001M20, FP4001M20, HCRF261295, HM466S-20, HM466S20, MB3342AM-20, MB3342AM20, MBK134172-020, MBK134172020, MS466P-20, MS466P20, P261295, RMB4453020, S.60878, TMS134020
tractor Fits Equipment
Allis Chalmers 706B Allis Chalmers 540
engine Fits Engines
Ford / New Holland 192 Ford / New Holland 172 | 1/'55 and after, 1.25" Piston Pin Diameter, Early press fit sleeves can be bored up to .040" oversize Ford / New Holland 144 | 1/'59 thru 12/'64, 1.124" Piston Pin Diameter
$6141
award-simple Best Price Promise!
box-check In Stock (92)
Qty:
The RF Engine Advantage
Family Operated Since 1975
Parts that meet or exceed OEM specifications. Guaranteed performance you can trust. Reliability built into every component.
A century of collective diesel knowledge and 10+ acres of engines and engine parts — we are more than just an online reseller or call center. We know heavy-duty diesel.
Same location and same phone number for the last 50 years. Same commitment to getting you the right parts at the right price.
RF Engine offers an expansive offering of new aftermarket, remanufactured, and used engines and engine parts all under one roof.

memo-circle-info Details

.020"oversize


medal Our aftermarket replacement parts are built to OEM-equivalent standards. They have been produced to meet or exceed original equipment specifications for material quality, dimensional tolerance, and field durability — the same rigors the factory part is designed to handle. The result is a component that installs like factory, performs like factory, and delivers long service life without the dealer price tag.

tractor Fitment Guide

forklift Forklifts (1)
Allis Chalmers 706B
bulldozer Wheel Loaders (1)
Allis Chalmers 540
engine Engines (6)
Ford / New Holland 192 4-cyl • Diesel
Ford / New Holland 172 | 1/'55 and after, 1.25" Piston Pin Diameter, Early press fit sleeves can be bored up to .040" oversize 4-cyl • Diesel
Ford / New Holland 144 | 1/'59 thru 12/'64, 1.124" Piston Pin Diameter 4-cyl • Diesel
Ford / New Holland 192 4-cyl • Gas/LPG
Ford / New Holland 172 | 1/'55 and after, .912" Piston Pin Diameter, Early press fit sleeves can be bored up to .040" oversize 4-cyl • Gas/LPG
Ford / New Holland 134 | 1/'53 and after, Press fit sleeves in early engines can be bored up to .040" oversize 4-cyl • Gas/LPG
exclamation While every effort has been made to ensure the accuracy of the fitment information listed above, it is ultimately the responsibility of the installing mechanic to perform a side-by-side comparison of the replacement part with the original to verify proper fit before installation. RF Engine is not liable for labor or consequential damages resulting from incorrect application.

shield-check Warranty Information

Overview

We stand behind every part we sell — new, rebuilt, or used. While RF Engine is not the manufacturer of any product we sell, we are committed to ensuring that each part is accurately represented, inspected where applicable, and delivered in the condition described at the time of sale.


New Parts

All new parts are warranted by the original manufacturer only and are subject to that manufacturer's specific terms and conditions. RF Engine and its subsidiaries do not offer any additional warranty or guarantee of any type, express or implied, on new products. Due to the vast number of manufacturers we work with, no specific warranty details can be outlined here. Please contact us for warranty information pertaining to your specific product.


Rebuilt, Remanufactured & Reconditioned Parts

Rebuilt, remanufactured, and reconditioned parts are used components that have been machined, reassembled, or otherwise restored toward original specifications by a third-party machine shop — not by RF Engine. These parts carry an inspection-only warranty unless otherwise expressly stated in writing by RF Engine at the time of sale. All products must be inspected before installation. By installing the product, the customer is expressly accepting, completely and without reserve, the product and all liability from the point of receipt forward.


Used Parts

Used parts are sold strictly on a representation basis. RF Engine attests that used parts are accurately described and within usable, serviceable condition at the time of sale. No warranty of performance, longevity, or fitness for a particular use is expressed or implied. Used parts are not refurbished, remanufactured, or restored to like-new condition and may exhibit signs of wear, surface rust, blemishes, old gaskets, residue, or other cosmetic imperfections. Further cleaning or machining prior to installation may be required.

No original equipment manufacturer warranties used parts to secondary purchasers, and RF Engine does not extend any warranty beyond accurate representation of condition.


First-Party Purchaser Only

All warranties, representations, and assurances of quality or fitment extended by RF Engine apply exclusively to the original, direct purchaser. These do not transfer to any third party, whether through resale, gifting, or use of the part in a third-party repair or service. RF Engine assumes no obligation or liability to anyone other than the original buyer.


Claims

All claims must be submitted to RF Engine in writing, immediately following any issue and before performing any disassembly or repairs of any type. Unauthorized disassembly, repair, or a delay in claim notification will void any applicable warranty. RF Engine reserves the right to inspect all products involved in any warranty claim. All products being returned for inspection must be sent freight pre-paid.

At no time will any reimbursement exceed the original purchase price of the product in question. Freight charges incurred by the customer will not be refunded under any circumstances. Where a manufacturer's warranty applies, RF Engine will assist the buyer through the claim process; however, the final determination of any warranty claim is made by the manufacturer, not by RF Engine.


Limitation of Liability

RF Engine and its subsidiaries offer no warranty of any kind, either express or implied, with regard to the merchantability or fitness for a particular use of any product sold. RF Engine acts only as a broker with regard to any machine work or outside labor. Any warranty or claim against machine work or outside labor is to be taken up directly with the individual or organization that performed the work.

In no event shall RF Engine be liable for any incidental, consequential, or special damages, including but not limited to engine damage, equipment downtime, labor costs, lost revenue, or any other costs arising from the use or inability to use any product sold by RF Engine, regardless of whether RF Engine has been advised of the possibility of such damages.


Installation & Responsibility

We strongly recommend that all parts be inspected prior to installation and that installation be performed by a qualified heavy-duty diesel mechanic. By installing any product purchased from RF Engine, the customer expressly accepts the product and assumes all liability from the point of installation forward.


Questions?

If you have questions about a part's condition, warranty coverage, or our claims process, feel free to contact us. We're here to help.


Last Updated: June 22, 2025

Main Bearing (.030") for Ford 261296

SKU: F261296

tag Brand: Mahle-clevite Mahle-Clevite brand replacement parts
sparkles Condition: New Aftermarket
shuffle Cross-References: 106271, 261296, 4001M30, 60879, A-MB634-30, F261296, FO002-MS466P30-CV, FP-4001M30, FP4001M30, HCRF261296, HM466S-30, HM466S30, MB3342AM-30, MB3342AM30, MBK134172-030, MBK134172030, MS466P-30, MS466P30, P261296, RMB4453030, S.60878, TMS134030
tractor Fits Equipment
Allis Chalmers 706B Allis Chalmers 540
engine Fits Engines
Ford / New Holland 192 Ford / New Holland 172 | 1/'55 and after, 1.25" Piston Pin Diameter, Early press fit sleeves can be bored up to .040" oversize Ford / New Holland 144 | 1/'59 thru 12/'64, 1.124" Piston Pin Diameter
$6141
award-simple Best Price Promise!
box-check In Stock (33)
Qty:
The RF Engine Advantage
Family Operated Since 1975
Parts that meet or exceed OEM specifications. Guaranteed performance you can trust. Reliability built into every component.
A century of collective diesel knowledge and 10+ acres of engines and engine parts — we are more than just an online reseller or call center. We know heavy-duty diesel.
Same location and same phone number for the last 50 years. Same commitment to getting you the right parts at the right price.
RF Engine offers an expansive offering of new aftermarket, remanufactured, and used engines and engine parts all under one roof.

memo-circle-info Details

.030"oversize


medal Our aftermarket replacement parts are built to OEM-equivalent standards. They have been produced to meet or exceed original equipment specifications for material quality, dimensional tolerance, and field durability — the same rigors the factory part is designed to handle. The result is a component that installs like factory, performs like factory, and delivers long service life without the dealer price tag.

tractor Fitment Guide

forklift Forklifts (1)
Allis Chalmers 706B
bulldozer Wheel Loaders (1)
Allis Chalmers 540
engine Engines (6)
Ford / New Holland 192 4-cyl • Diesel
Ford / New Holland 172 | 1/'55 and after, 1.25" Piston Pin Diameter, Early press fit sleeves can be bored up to .040" oversize 4-cyl • Diesel
Ford / New Holland 144 | 1/'59 thru 12/'64, 1.124" Piston Pin Diameter 4-cyl • Diesel
Ford / New Holland 192 4-cyl • Gas/LPG
Ford / New Holland 172 | 1/'55 and after, .912" Piston Pin Diameter, Early press fit sleeves can be bored up to .040" oversize 4-cyl • Gas/LPG
Ford / New Holland 134 | 1/'53 and after, Press fit sleeves in early engines can be bored up to .040" oversize 4-cyl • Gas/LPG
exclamation While every effort has been made to ensure the accuracy of the fitment information listed above, it is ultimately the responsibility of the installing mechanic to perform a side-by-side comparison of the replacement part with the original to verify proper fit before installation. RF Engine is not liable for labor or consequential damages resulting from incorrect application.

shield-check Warranty Information

Overview

We stand behind every part we sell — new, rebuilt, or used. While RF Engine is not the manufacturer of any product we sell, we are committed to ensuring that each part is accurately represented, inspected where applicable, and delivered in the condition described at the time of sale.


New Parts

All new parts are warranted by the original manufacturer only and are subject to that manufacturer's specific terms and conditions. RF Engine and its subsidiaries do not offer any additional warranty or guarantee of any type, express or implied, on new products. Due to the vast number of manufacturers we work with, no specific warranty details can be outlined here. Please contact us for warranty information pertaining to your specific product.


Rebuilt, Remanufactured & Reconditioned Parts

Rebuilt, remanufactured, and reconditioned parts are used components that have been machined, reassembled, or otherwise restored toward original specifications by a third-party machine shop — not by RF Engine. These parts carry an inspection-only warranty unless otherwise expressly stated in writing by RF Engine at the time of sale. All products must be inspected before installation. By installing the product, the customer is expressly accepting, completely and without reserve, the product and all liability from the point of receipt forward.


Used Parts

Used parts are sold strictly on a representation basis. RF Engine attests that used parts are accurately described and within usable, serviceable condition at the time of sale. No warranty of performance, longevity, or fitness for a particular use is expressed or implied. Used parts are not refurbished, remanufactured, or restored to like-new condition and may exhibit signs of wear, surface rust, blemishes, old gaskets, residue, or other cosmetic imperfections. Further cleaning or machining prior to installation may be required.

No original equipment manufacturer warranties used parts to secondary purchasers, and RF Engine does not extend any warranty beyond accurate representation of condition.


First-Party Purchaser Only

All warranties, representations, and assurances of quality or fitment extended by RF Engine apply exclusively to the original, direct purchaser. These do not transfer to any third party, whether through resale, gifting, or use of the part in a third-party repair or service. RF Engine assumes no obligation or liability to anyone other than the original buyer.


Claims

All claims must be submitted to RF Engine in writing, immediately following any issue and before performing any disassembly or repairs of any type. Unauthorized disassembly, repair, or a delay in claim notification will void any applicable warranty. RF Engine reserves the right to inspect all products involved in any warranty claim. All products being returned for inspection must be sent freight pre-paid.

At no time will any reimbursement exceed the original purchase price of the product in question. Freight charges incurred by the customer will not be refunded under any circumstances. Where a manufacturer's warranty applies, RF Engine will assist the buyer through the claim process; however, the final determination of any warranty claim is made by the manufacturer, not by RF Engine.


Limitation of Liability

RF Engine and its subsidiaries offer no warranty of any kind, either express or implied, with regard to the merchantability or fitness for a particular use of any product sold. RF Engine acts only as a broker with regard to any machine work or outside labor. Any warranty or claim against machine work or outside labor is to be taken up directly with the individual or organization that performed the work.

In no event shall RF Engine be liable for any incidental, consequential, or special damages, including but not limited to engine damage, equipment downtime, labor costs, lost revenue, or any other costs arising from the use or inability to use any product sold by RF Engine, regardless of whether RF Engine has been advised of the possibility of such damages.


Installation & Responsibility

We strongly recommend that all parts be inspected prior to installation and that installation be performed by a qualified heavy-duty diesel mechanic. By installing any product purchased from RF Engine, the customer expressly accepts the product and assumes all liability from the point of installation forward.


Questions?

If you have questions about a part's condition, warranty coverage, or our claims process, feel free to contact us. We're here to help.


Last Updated: June 22, 2025

Main Bearing Set (.040") for Allis Chalmers 261297

SKU: F261297

tag Brand: Reliance Reliance brand replacement parts
sparkles Condition: New Aftermarket
shuffle Cross-References: 106272, 261297, 4001M40, 60880, F261297, FO002-MS466P40-CV, FP-4001M40, FP4001M40, HCRF261297, HM466S-40, HM466S40, MB3342AM-40, MB3342AM40, MBK134172-040, MBK134172040, MS-466P-040, MS466P-40, MS466P40, P261297, RMB4453040, S.60880, TMS134040
tractor Fits Equipment
Allis Chalmers 706B Allis Chalmers 540
engine Fits Engines
Ford / New Holland 192 Ford / New Holland 172 | 1/'55 and after, 1.25" Piston Pin Diameter, Early press fit sleeves can be bored up to .040" oversize Ford / New Holland 144 | 1/'59 thru 12/'64, 1.124" Piston Pin Diameter
$8467
award-simple Best Price Promise!
box-open Out of Stock

Call 800-828-6943 to check availability.

The RF Engine Advantage
Family Operated Since 1975
Parts that meet or exceed OEM specifications. Guaranteed performance you can trust. Reliability built into every component.
A century of collective diesel knowledge and 10+ acres of engines and engine parts — we are more than just an online reseller or call center. We know heavy-duty diesel.
Same location and same phone number for the last 50 years. Same commitment to getting you the right parts at the right price.
RF Engine offers an expansive offering of new aftermarket, remanufactured, and used engines and engine parts all under one roof.

memo-circle-info Details

.040"oversize


medal Our aftermarket replacement parts are built to OEM-equivalent standards. They have been produced to meet or exceed original equipment specifications for material quality, dimensional tolerance, and field durability — the same rigors the factory part is designed to handle. The result is a component that installs like factory, performs like factory, and delivers long service life without the dealer price tag.

tractor Fitment Guide

forklift Forklifts (1)
Allis Chalmers 706B
bulldozer Wheel Loaders (1)
Allis Chalmers 540
engine Engines (6)
Ford / New Holland 192 4-cyl • Diesel
Ford / New Holland 172 | 1/'55 and after, 1.25" Piston Pin Diameter, Early press fit sleeves can be bored up to .040" oversize 4-cyl • Diesel
Ford / New Holland 144 | 1/'59 thru 12/'64, 1.124" Piston Pin Diameter 4-cyl • Diesel
Ford / New Holland 192 4-cyl • Gas/LPG
Ford / New Holland 172 | 1/'55 and after, .912" Piston Pin Diameter, Early press fit sleeves can be bored up to .040" oversize 4-cyl • Gas/LPG
Ford / New Holland 134 | 1/'53 and after, Press fit sleeves in early engines can be bored up to .040" oversize 4-cyl • Gas/LPG
exclamation While every effort has been made to ensure the accuracy of the fitment information listed above, it is ultimately the responsibility of the installing mechanic to perform a side-by-side comparison of the replacement part with the original to verify proper fit before installation. RF Engine is not liable for labor or consequential damages resulting from incorrect application.

shield-check Warranty Information

Reliance Power Parts Warranty Policy

The Reliance Power Parts (RPP) warranty policy covers parts and labor necessary to repair a warrantable failure to the functional condition of the application that existed immediately prior to the failure, as detailed below. This warranty applies to direct customers of RPP only and is non-transferable.


Coverage Periods

  • New Internal Engine Parts (Ag/Industrial): 1 year from invoice date, unlimited miles/hours
  • Engine Overhaul Kits (Heavy-Duty On-Highway): 2 years from invoice date, unlimited miles/hours
  • New Engine Accessories: 1 year from invoice date, parts replacement only
  • Remanufactured Engine Accessories: 6 months from invoice date, parts replacement only
  • Remanufactured Engine & Drivetrain Parts: 6 months from invoice date, parts replacement only
  • Drivetrain Parts: 1 year from invoice date, parts replacement only
  • Complete Engines, New Long Blocks & New Short Blocks (Reliance Manufactured): 6 months from invoice date, parts replacement only
  • Remanufactured Long Blocks & Short Blocks (Reliance Manufactured): 90 days from invoice date, parts replacement only

Engine accessories include turbochargers, fuel injectors, hydraulic pumps, engine oil pumps, oil coolers, water pumps, and electrical components.


Manufacturer's Warranty Items

To serve a wider application base, RPP offers lower volume, rare application, and remanufactured parts from a variety of manufacturers. These parts will be noted on your invoice as subject to a "Manufacturer's Warranty" policy and are not covered under this policy. Engines, long blocks, medium blocks, and short blocks produced by any company other than Reliance are solely covered by the manufacturer's warranty. Contact your Reliance representative for details.


Parts & Labor Coverage

  • Parts: Covered at current customer pricing using new or remanufactured RPP approved parts
  • OEM/Outside Parts: When RPP parts are available, OEM parts will be credited at RPP pricing. Parts not available from RPP will be covered at billed rate with invoice required
  • Labor: Offered at RPP's discretion, not to exceed published flat-rate times and maximum regional wholesale hourly labor rate
  • Holiday/Overtime Rates: Not covered

What's Not Covered

This warranty does not cover failures resulting from:

  • Owner or operator abuse or neglect
  • Operation without adequate coolant, fuel, or lubricants
  • Over-fueling or over-speeding
  • Lack of maintenance of lubricating, coolant, or air intake systems
  • Improper storage, starting, warm-up, run-in, or shut-down practices

Coverage does not include:

  • Troubleshooting or diagnostic time
  • Towing, transport, or down-time
  • Rental fees or incidentals
  • Delivery charges, travel, meals, or lodging
  • Business losses, docking, or harbor charges

Responsibilities

  • Installer: Ensure parts are correct for the application and install according to OEM procedures, specifications, and accepted industry standards
  • Owner: Operate and maintain equipment as specified in OEM operation and maintenance manuals

How to File a Claim

  • RPP must be notified prior to the end of the warranty period
  • All warranty repairs must be authorized by RPP technical staff
  • Request a Warranty Claim Form for the return of parts
  • Return all claimed parts to the indicated location within 30 days of receiving a Return Merchandise Authorization
  • Include failed parts, completed Warranty Claim Form, and copies of related work orders or invoices
  • Ship parts freight pre-paid in a condition that makes examination possible
  • Parts received without a Warranty Claim Form will be returned freight collect

Important Notes

  • Professional Installation Required: We strongly recommend installation by a qualified technician to ensure proper break-in and operation
  • Keep Your Records: Retain your invoice and service records for warranty claims
  • Questions?: If you're unsure about coverage or need assistance, please contact us

The warranties set forth herein are the sole warranties made by RPP regarding its parts. RPP makes no other warranties, expressed or implied, of merchantability or fitness for a particular purpose.

tractor Check fit for this part

Select your make and model below to verify whether this part fits your application.

Loading manufacturers...
No exact match — closest matches:
No matching engines or equipment found.
OR BROWSE
OR
Fitment results are based on our application database. Always verify by side-by-side comparison before installation. Questions? Call 800-828-6943.

hourglass-clock Recently Viewed

triangle-exclamation All specifications and numbers are provided for reference only and should be independently verified before use. While we guarantee our parts match their descriptions and accept returns for any discrepancies, we cannot be held liable for installation costs, modifications, or consequential damages. Questions about compatibility? Contact our parts experts at 800-828-6943, Mon-Fri 8am-5pm EST.
award-simple Our Best Price Promise
Added to your wish list Removed from your wish list