Engine Complete Rebuilt fits International DT466EGR, 7.6L 54G4D245BF, 2596571C91

DT-466E, 245-285 HP 12NPP, 12NPS, 12NPT, 12NPU, 12NPV turbo=LMRO, Front Sump

APPLICATIONS

DT-466EGR diesel engines are configured for International delivery trucks, garbage trucks, dump trucks and school buses.

• Model Years 2004-2007.5

ABOUT THE DT-466EGR

• All Remanufactured engines are assembled in the USA.
• Shop replaces 100% of pistons, rings, bearings, bushings, gaskets and seals.
• All heads get new valves and are vacuum tested to ensure the quality of the valve job.
• Shop grinds and polishes 100% of camshafts? lobes.
• All connecting rods are de-magnetized.
• All high-pressure oil pumps are remanufactured and tested to ensure performance.
• Core plugs are 100% stainless steel to avoid corrosion.
• Blocks, heads and crankshafts are magnaflux tested to avoid any possible cracks.
• Cylinder heads are pressure tested before assembly to eliminate possibility of coolant leak.
• Blocks are resurfaced and have counterbores remachined to ensure proper sleeve protrusion and head gasket sealing.
• Connecting rods have new bushings installed and both large and small end are remachined to OEM specifications.
• Crankshaft is checked for size, reground, if necessary, and polished to OEM specifications.

DYNO TEST

All Remanufactured Complete Drop-In engines are 100% dyno tested prior to shipment. Computer controls ensure that each engine dyno test is conducted under standard, repeatable settings. Every engine is run through a warm up cycle; three separate segments simulating light, medium and heavy throttle conditions; maximum torque and horsepower tests; both high and low idle tests; and a black light leak detection test with dyed oil, coolant and fuel.

LONG BLOCK INCLUDES:

• Block
• Crankshaft
• Rods
• Oil pump
• Valve cover
• Valve train
• Piston/sleeve assemblies
• Camshaft
• Timing gears
• Head
• Front cover & seal
• Crankshaft hub & damper
• High pressure oil pump

* GASKET SET TO COMPLETE LONG BLOCK AVAILABLE FOR PURCHASE

RUNNING ENGINE INCLUDES:

ALL PARTS ON THE LONG BLOCK PLUS

• Oil pan
• Oil cooler
• Pickup tube
• Water pump (no pulley)
• Oil filter
• Thermostat
• Thermostat housing
• Flywheel housing
• Front engine mount
• Dipstick guide (lower portion)
• Turbocharger
• Intake manifold & air inlet
• Exhaust manifolds
• All sensors
• Complete fuel system (injectors, high & low-pressure lines& fuel filter assembly)

* GASKET SET TO COMPLETE RUNNING ENGINE AVAILABLE FOR PURCHASE

COMPLETE DROP-IN ENGINE INCLUDES:

ALL PARTS ON THE RUNNING ENGINE PLUS

• EGR cooler
• EGR valve
• EGR pipes

Additional Core Charge of $ 3600 Required

Free Freight Lower 48 States Business to Business