Reman Long Block for International (Neuss) D239, DT239

SKU: IH239EL
tag Brand: RF Engine RF Engine in-house reman
flux-capacitor Condition: Remanufactured
tractor Fits Equipment
International 250A International 260A International TD-7E International TD-8C
engine Fits Engines
International DT239 | Neuss, Early Turbocharged, 38mm Piston Pin, Engines built up to 1979, 4.667-4.677" Liner o-ring groove diameter, 5.0mm Liner O-ring International D239 | Neuss, Early SN, Engines built up to 1979, 4.667-4.677" Liner o-ring groove diameter, 5.0mm Liner O-ring International D239 | Neuss, Late SN, Engines built after 1979, 4.658-4.667" Liner o-ring groove diameter, 4.75mm Liner O-ring
$5,51500
award-simple Best Price Promise!
money-bill-transfer +$1,00000 Core Charge*
*See Item Specifics for core return criteria.
box-open Out of Stock
Call 800-828-6943 to check availability.
The RF Engine Advantage
Family Operated Since 1975
Parts that meet or exceed OEM specifications. Guaranteed performance you can trust. Reliability built into every component.
A century of collective diesel knowledge and 10+ acres of engines and engine parts — we are more than just an online reseller or call center. We know heavy-duty diesel.
Same location and same phone number for the last 50 years. Same commitment to getting you the right parts at the right price.
RF Engine offers an expansive offering of new aftermarket, remanufactured, and used engines and engine parts all under one roof.

memo-circle-info Details

flux-capacitor Remanufactured replacement long block.

box-open-full Built with "Dominator" enhanced compression ratio pistons. Includes rotation assembly (block, crank, rods, & pistons), cylinder head (new injector tubes installed) with rocker arm assembly & valve cover, camshaft with lifters & pushrods, and oil pump (internal).

recycle Installer re-uses injection pump gear and fuel system, starter, alternator, flywheel, intake and exhaust manifolds, front cover, oil pan & pick-up tube, hydraulic or accessory drive pump, and all other external components.

This series engine was produced with two oil pump styles, internal or external. To identify yours, look at the lower side of the engine block: a pump body bolted to the outside of the block with an external pickup line indicates an external-mount oil pump; a smooth outer block with the pump only accessible from inside the oil pan indicates an internal-mount oil pump.

triangle-exclamation There is a $1000 core refund deduction if the core returned has a bad block.

tractor Fitment Guide

excavator Backhoes (2)
International 250A
International 260A
bulldozer Crawlers (3)
International TD-7E
International TD-8C
International TD-8E
tractor Tractors (18)
International 2500
International 2500A
International 2500B
International 2505B
International 2510B
International 2514B
International 2544
International 3500A
International 3514
International 4210
International 514
International 544
International 574
International 664
International 674
International 684
International 685
International 695
bulldozer Wheel Loaders (4)
International 100E
International 125
International 125C
International 125E
wheat-awn Windrowers (3)
International 4000
International 5000
International 5500
engine Engines (5)
International DT239 | Neuss, Early Turbocharged, 38mm Piston Pin, Engines built up to 1979, 4.667-4.677" Liner o-ring groove diameter, 5.0mm Liner O-ring 4-cyl • Diesel
International D239 | Neuss, Early SN, Engines built up to 1979, 4.667-4.677" Liner o-ring groove diameter, 5.0mm Liner O-ring 4-cyl • Diesel
International D239 | Neuss, Late SN, Engines built after 1979, 4.658-4.667" Liner o-ring groove diameter, 4.75mm Liner O-ring 4-cyl • Diesel
International D239 | Neuss, Late SN, Engines built after 1979, 4.658-4.667" Liner o-ring groove diameter, 4.75mm Liner O-ring 4-cyl • Diesel
International DT239 | Neuss, late Turbocharged, 38mm Piston Pin, Engines built after 1979, 4.658-4.667" Liner o-ring groove diameter, 4.75mm Liner O-ring 4-cyl • Diesel
exclamation While every effort has been made to ensure the accuracy of the fitment information listed above, it is ultimately the responsibility of the installing mechanic to perform a side-by-side comparison of the replacement part with the original to verify proper fit before installation. RF Engine is not liable for labor or consequential damages resulting from incorrect application.

shield-check Warranty Information

Overview

We stand behind every part we sell — new, rebuilt, or used. While RF Engine is not the manufacturer of any product we sell, we are committed to ensuring that each part is accurately represented, inspected where applicable, and delivered in the condition described at the time of sale.


New Parts

All new parts are warranted by the original manufacturer only and are subject to that manufacturer's specific terms and conditions. RF Engine and its subsidiaries do not offer any additional warranty or guarantee of any type, express or implied, on new products. Due to the vast number of manufacturers we work with, no specific warranty details can be outlined here. Please contact us for warranty information pertaining to your specific product.


Rebuilt, Remanufactured & Reconditioned Parts

Rebuilt, remanufactured, and reconditioned parts are used components that have been machined, reassembled, or otherwise restored toward original specifications by a third-party machine shop — not by RF Engine. These parts carry an inspection-only warranty unless otherwise expressly stated in writing by RF Engine at the time of sale. All products must be inspected before installation. By installing the product, the customer is expressly accepting, completely and without reserve, the product and all liability from the point of receipt forward.


Used Parts

Used parts are sold strictly on a representation basis. RF Engine attests that used parts are accurately described and within usable, serviceable condition at the time of sale. No warranty of performance, longevity, or fitness for a particular use is expressed or implied. Used parts are not refurbished, remanufactured, or restored to like-new condition and may exhibit signs of wear, surface rust, blemishes, old gaskets, residue, or other cosmetic imperfections. Further cleaning or machining prior to installation may be required.

No original equipment manufacturer warranties used parts to secondary purchasers, and RF Engine does not extend any warranty beyond accurate representation of condition.


First-Party Purchaser Only

All warranties, representations, and assurances of quality or fitment extended by RF Engine apply exclusively to the original, direct purchaser. These do not transfer to any third party, whether through resale, gifting, or use of the part in a third-party repair or service. RF Engine assumes no obligation or liability to anyone other than the original buyer.


Claims

All claims must be submitted to RF Engine in writing, immediately following any issue and before performing any disassembly or repairs of any type. Unauthorized disassembly, repair, or a delay in claim notification will void any applicable warranty. RF Engine reserves the right to inspect all products involved in any warranty claim. All products being returned for inspection must be sent freight pre-paid.

At no time will any reimbursement exceed the original purchase price of the product in question. Freight charges incurred by the customer will not be refunded under any circumstances. Where a manufacturer's warranty applies, RF Engine will assist the buyer through the claim process; however, the final determination of any warranty claim is made by the manufacturer, not by RF Engine.


Limitation of Liability

RF Engine and its subsidiaries offer no warranty of any kind, either express or implied, with regard to the merchantability or fitness for a particular use of any product sold. RF Engine acts only as a broker with regard to any machine work or outside labor. Any warranty or claim against machine work or outside labor is to be taken up directly with the individual or organization that performed the work.

In no event shall RF Engine be liable for any incidental, consequential, or special damages, including but not limited to engine damage, equipment downtime, labor costs, lost revenue, or any other costs arising from the use or inability to use any product sold by RF Engine, regardless of whether RF Engine has been advised of the possibility of such damages.


Installation & Responsibility

We strongly recommend that all parts be inspected prior to installation and that installation be performed by a qualified heavy-duty diesel mechanic. By installing any product purchased from RF Engine, the customer expressly accepts the product and assumes all liability from the point of installation forward.


Questions?

If you have questions about a part's condition, warranty coverage, or our claims process, feel free to contact us. We're here to help.


Last Updated: June 22, 2025

tractor Check fit for this part

Select your make and model below to verify whether this part fits your application.

Loading manufacturers...
No exact match — closest matches:
No matching engines or equipment found.
OR BROWSE
OR
Fitment results are based on our application database. Always verify by side-by-side comparison before installation. Questions? Call 800-828-6943.

hourglass-clock Recently Viewed

award-simple Our Best Price Promise
Added to your wish list Removed from your wish list