Details
Build to Order
Built to the Highest Standards
- Every engine is completely disassembled.
- All components cleaned and detailed.
- All major components are machined to meet or exceed OE specifications.
- Wear parts are replaced with 100% new.
- Fuel Systems and Turbochargers are remanufactured and tested.
- Long block and long block supremes are SIM tested.
- All Drop-In engines are dyno tested on electronically controlled dynamometers.
- Finally painted, packed and prepped for delivery.
Engine Testing: Complete Drop-In
Complete Drop-In engines are 100% dyno tested before shipment. Computer controls ensure that each engine dyno test is conducted under standard, repeatable settings. Every engine is run through a warm-up cycle; three separate cruise segments simulating light, medium, and heavy throttle conditions; maximum torque and horsepower tests; both high and low idle tests; and a black light leak detection test with dyed oil, coolant, and fuel.
Engine Testing: Long Block
Every Long Block and Long Block Supreme is SIM (simulation) tested for performance using an outside power source to rotate the Long Block or Long Block Supreme at approximately 700-800 RPMs. This allows each unit to be tested for cylinder compression, rotational torque, oil pressure, coolant pressure, noises, and interference. Units are checked with a black light to ensure no leaks. The unit is not under its own power or running on fuel at this point.
Core Return Criteria
- 100% visual inspection
- If there are visible holes or cracks in the block there is a 50% core charge back
- No hidden costs or crank rotation required
Warranty Information
REMANUFACTURED ENGINE LIMITED WARRANTY
WARRANTY COVERAGE PERIODS
Diesel Engines
| Product | Application | Coverage |
|---|---|---|
| Complete Drop-In | On Highway | 2 Years / Unlimited Miles – Parts & Labor |
| Motorcoach / Motorhome | 1 Year / Unlimited Miles – Parts & Labor | |
| Off Highway / Industrial / Marine | 1 Year / Unlimited Hours – Parts & Labor | |
| Long Block Supreme / Long Block / Basic Long Block | All Applications | 1 Year / Unlimited Miles/Hours – Parts & Labor |
| Transit Bus | 1 Year / 1,000 Hours – Parts & Labor | |
| Short Block | All Applications | 1 Year / 12,000 Miles – Parts & Labor |
Gasoline Engines
| Product | Application | Coverage |
|---|---|---|
| Complete Drop-In | On Highway Only | 2 Years / Unlimited Miles – Parts & Labor |
Engine Components
| Product | Coverage |
|---|---|
| Cylinder Heads (New or Remanufactured) | 1 Year / Unlimited Miles – Parts & Limited Labor* |
| All Other Components | 1 Year / Unlimited Miles – Parts Only |
* First 6 months: total covered labor charges capped at $1,500. Second 6 months: parts coverage only, no labor.
Labor Hour Limits
- On Highway Diesel Drop-In: 40 hours maximum
- Transit Bus / Motorcoach / Motorhome / Marine / Off Highway / Industrial: 30 hours maximum
- Gasoline Engines: 20 hours maximum
- 2nd Year Coverage (Drop-In): Long Block only
LIMITED WARRANTY
The remanufacturer warrants to the purchaser and original owner that the remanufactured product will be free from defects in materials and workmanship under normal use and service for the time periods and coverage specified above. The limited warranty period commences from the date of product installation or thirty (30) days from shipment, whichever occurs first.
Subject to the coverage periods above, the exclusive remedy and sole liability, whether based on contract, warranty, tort, or any other basis, is limited at the remanufacturer's election to:
- Replacement of any product or part found not to conform to the limited warranty, or
- Repair of such product or part, or
- Refund or credit of the net sales price of the defective product or part
CONDITIONS AND EXCLUSIONS
This limited warranty applies only to products sold and used in the continental United States and Canada.
To be eligible for warranty coverage:
- A completed registration form and copy of the repair order or installation record must be received within 30 days of shipment
- The claim and repair procedures must be followed
- The failure must be a direct result of a defect in material or workmanship
This limited warranty excludes:
- Damages due to accident, abuse, misuse, tampering, abnormal operating conditions, negligence, improper shipping, storage, installation, maintenance, or fluids
- Products manufactured by others (covered only by their manufacturer's warranty)
- Products installed, altered, modified, serviced, or repaired by non-competent facilities
- Normal maintenance and wear items (filters, hoses, belts, fluids, gaskets, seals, etc.)
- Glow plugs or sensors (covered for 6 months only)
- Products with modified emissions or management systems
- Products with tampered serial numbers or altered mileage/hours
- Products sold or transferred to another owner (warranty is non-transferable)
- Diagnostics or repairs incurred prior to warranty determination
- Towing, premium freight, taxes, travel, lodging, loss of revenue, rental charges, overtime, or property damage
CLAIM AND REPAIR PROCEDURES
Prior to performing any repairs, the owner must establish that the product is within warranty coverage and file a claim. Until the remanufacturer determines there is a covered defect, all diagnostics and repairs are the owner's responsibility.
Repair facilities must:
- Verify the product is within the warranty period and was properly registered
- Identify and report the defect with detailed description of the complaint and cause of failure
- Provide detailed product, owner, and application information including mileage/hours
- Obtain authorization before proceeding with repairs
- Facilitate return of the failed product and submit repair order within 45 days
Labor Rates: The maximum hourly labor rate for fleet-installed engines is $60/hour. The maximum hourly rate otherwise is $95/hour. Reimbursement is based on Standard Repair Times (SRTs) published in industry-recognized labor manuals.
Payment: Claims are processed only after the product has been returned, analyzed, and approved for a covered defect. Non-covered expenses are the responsibility of the owner or repair facility.
WARRANTY LIMITATIONS
THE WARRANTIES SET FORTH HERE ARE THE ONLY WARRANTIES MADE. ALL OTHER WARRANTIES ARE EXCLUDED, WHETHER EXPRESS OR IMPLIED BY OPERATION OF LAW OR OTHERWISE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT SHALL THE REMANUFACTURER BE LIABLE FOR DAMAGES OF ANY KIND, WHETHER DIRECT, INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR FOR PERSONAL INJURY OR PROPERTY DAMAGES.
If a warranty claim is not pursued or acted on for over thirty (30) days, it will be closed. The warranty period remaining after repair or replacement shall be the remaining months or miles from the original installation date.
Last Updated: December 2025
Recently Viewed
Caterpillar C7 230HP, AR# 281-9723 Complete Reman Drop-In Engine | 64G6D230F
International DT-530E, 300HP, BD injector (1824920C2) Complete Reman Drop-In Engine | 54F6D300BR
Kubota V2403MDI Tier 4i Complete Reman Drop-In Engine | V2403MDI4B
Caterpillar C15 ACERT Reman Long Block | 73G4L152SB
Cummins Bus Applications, 300HP @ 2,200 RPM, Un-Notched Cylinder Head Pump, Low Mount PTO Complete Reman Drop-In Engine | 61F4D300BR
Cummins 260HP Turbo, JWAC/RQV, Low Mount PTO Complete Reman Drop-In Engine | 61F6D261BR
Caterpillar C12 Reman Long Block | 73F4B120SB
Cummins Un-Notched Cylinder head, MW Pump, Low Mount PTO Reman Long Block Supreme | 61F6M083AR
Cummins Freightliner, 210HP, Deep,Un-Notched Head Pump, Low Mount PTO Complete Reman Drop-In Engine | 61F4D210C
Cummins Kalmar/Ottawa Tractor , F/H 4941044, G/H 4936424 Complete Reman Drop-In Engine | 65G7D200A
Cummins 80HP, VE, Side Out Exhaust Complete Reman Drop-In Engine | 55F7D080BF
International DT-466P, 230HP Complete Reman Drop-In Engine | 54F4D230BR
All specifications and numbers are provided for reference only and should be independently verified before use. While we guarantee our parts match their descriptions and accept returns for any discrepancies, we cannot be held liable for installation costs, modifications, or consequential damages. Questions about compatibility? Contact our parts experts at 800-828-6943, sales@dieselcranks.com, or via live chat, Mon-Fri 8am-5pm EST.