Details
Remanufactured replacement long block.
- Cylinder Head C/N: R62143
- Block C/N: R80725
- No Turbo Drain Back in Block
- 3-Bolt Injection Pump with 1.95" Opening in Front Plate
- Piston Pin Ø: 1.375"
- Piston: RE19282
- Rear Mounting Bolts: 5/8"
Includes rotation assembly (block, crank, rods, & pistons), cylinder head with rocker arm assembly & valve cover, camshaft with lifters & pushrods, oil pump, oil pick-up tube, and finishing gasket set.
Installer re-uses injection pump gear and fuel system, starter, alternator, bellhousing, flywheel, front gear housing, manifolds, turbocharger (where applicable), hydraulic or accessory drive pump, and all other external components.
There is a $750 core refund deduction if the core returned has a bad cylinder block.
Fitment Guide
Warranty Information
Overview
We stand behind every part we sell — new, rebuilt, or used. While RF Engine is not the manufacturer of any product we sell, we are committed to ensuring that each part is accurately represented, inspected where applicable, and delivered in the condition described at the time of sale.
New Parts
All new parts are warranted by the original manufacturer only and are subject to that manufacturer's specific terms and conditions. RF Engine and its subsidiaries do not offer any additional warranty or guarantee of any type, express or implied, on new products. Due to the vast number of manufacturers we work with, no specific warranty details can be outlined here. Please contact us for warranty information pertaining to your specific product.
Rebuilt, Remanufactured & Reconditioned Parts
Rebuilt, remanufactured, and reconditioned parts are used components that have been machined, reassembled, or otherwise restored toward original specifications by a third-party machine shop — not by RF Engine. These parts carry an inspection-only warranty unless otherwise expressly stated in writing by RF Engine at the time of sale. All products must be inspected before installation. By installing the product, the customer is expressly accepting, completely and without reserve, the product and all liability from the point of receipt forward.
Used Parts
Used parts are sold strictly on a representation basis. RF Engine attests that used parts are accurately described and within usable, serviceable condition at the time of sale. No warranty of performance, longevity, or fitness for a particular use is expressed or implied. Used parts are not refurbished, remanufactured, or restored to like-new condition and may exhibit signs of wear, surface rust, blemishes, old gaskets, residue, or other cosmetic imperfections. Further cleaning or machining prior to installation may be required.
No original equipment manufacturer warranties used parts to secondary purchasers, and RF Engine does not extend any warranty beyond accurate representation of condition.
First-Party Purchaser Only
All warranties, representations, and assurances of quality or fitment extended by RF Engine apply exclusively to the original, direct purchaser. These do not transfer to any third party, whether through resale, gifting, or use of the part in a third-party repair or service. RF Engine assumes no obligation or liability to anyone other than the original buyer.
Claims
All claims must be submitted to RF Engine in writing, immediately following any issue and before performing any disassembly or repairs of any type. Unauthorized disassembly, repair, or a delay in claim notification will void any applicable warranty. RF Engine reserves the right to inspect all products involved in any warranty claim. All products being returned for inspection must be sent freight pre-paid.
At no time will any reimbursement exceed the original purchase price of the product in question. Freight charges incurred by the customer will not be refunded under any circumstances. Where a manufacturer's warranty applies, RF Engine will assist the buyer through the claim process; however, the final determination of any warranty claim is made by the manufacturer, not by RF Engine.
Limitation of Liability
RF Engine and its subsidiaries offer no warranty of any kind, either express or implied, with regard to the merchantability or fitness for a particular use of any product sold. RF Engine acts only as a broker with regard to any machine work or outside labor. Any warranty or claim against machine work or outside labor is to be taken up directly with the individual or organization that performed the work.
In no event shall RF Engine be liable for any incidental, consequential, or special damages, including but not limited to engine damage, equipment downtime, labor costs, lost revenue, or any other costs arising from the use or inability to use any product sold by RF Engine, regardless of whether RF Engine has been advised of the possibility of such damages.
Installation & Responsibility
We strongly recommend that all parts be inspected prior to installation and that installation be performed by a qualified heavy-duty diesel mechanic. By installing any product purchased from RF Engine, the customer expressly accepts the product and assumes all liability from the point of installation forward.
Questions?
If you have questions about a part's condition, warranty coverage, or our claims process, feel free to contact us. We're here to help.
Last Updated: June 22, 2025
Recently Viewed
Caterpillar 3126 (190 HP, 222-5964 Injector) Complete Reman Drop-In Engine | 64F8D190D
John Deere 4.19" Bore Cylinder Liner O-Ring Set | Replaces AR65507
Cummins 4BT 3.9L (100 HP) Complete Reman Drop-In Engine | 55F7D100AR
Allis Chalmers B125, CE, CR, R, B116, BE Gas & LPG Governor Gear, 70222841
Caterpillar 3126 (230+ HP, 3-Valve, 2-Pc. Cast Iron Front Housing) Reman Long Block | 64G2L072B
Valve Train Kit
Perkins 108 Diesel Cylinder Sleeve (31358117)
International IH G248 Engine Block Used 8280DK ONE BROKEN HEAD STUD. 4 Cyl GAS
David Brown AD3/55 Diesel Conversion Gasket Set, RP321138
Ford KSG411, KSG416, 1.6L Oil Pump
Ford 6.0L Powerstroke (E-Series E350-E450, with EBP Valve) Complete Reman Drop-In Engine | 59G2D200FF
Ford 134 (1/2" Head Bolt, Sleeved Block) Inframe Engine Rebuild Kit
All specifications and numbers are provided for reference only and should be independently verified before use. While we guarantee our parts match their descriptions and accept returns for any discrepancies, we cannot be held liable for installation costs, modifications, or consequential damages. Questions about compatibility? Contact our parts experts at 800-828-6943, sales@dieselcranks.com, or via live chat, Mon-Fri 8am-5pm EST.